This is a 32″ LED light bar from MICTUNING. It’s rated at 180W with 60 X 3W LED chips. The light output is rated at 13200 lumens at 6000k which is pure white. The light bar comes well packaged in bubble wrap and includes all mounting hardware along with the relay wiring harness. There are 8 LEDs on each side with flood light reflectors. The center LEDs have spot light reflectors. The construction of the housing is all aluminum. The front lens is made of polycarbonate. The unit feels solid.
The light bar wiring is bare wire, so you will need to use the included crimp connectors to connect to the relay harness. The relay harness has a 10 A fuse and the output from the relay goes to 2 pairs of wires for you to connect to 2 light bars if you need to. The harness on/off switch is illuminated and has plenty of length for you to run it into your vehicle.
I tried the light at night and the beam pattern is a large spot circle which gives you a bright center spot light. At a 100 feet in total darkness, the light bar was able to illuminate the area without problem. The light bar did not get too hot even after running it for about 30 minutes. Keep in mind, at 32 in, this is a very wide light bar, so it can be either mounted on the roof or on the front bumper.
